How do I install leg extenders on The Studio X

Once you have received the leg extenders, you need four per reformer, please follow the instructions below for a guide on how to install.

1. You will need to remove the grey piece on the bottom of the legs to get to the bolt through the bottom of the leg.

2. Remove the bolts from the end of the reformer.

3. Remove the bolt from the underside of the frame.

4. Fit the leg extender onto the machine and redo the bolts back up the same way. The leg extender should fit so you will be screwing into that second hole on the underside from the 3^rd picture. 5. The Wheels will come off with the bolts at the foot bar end of the reformer, just remember to put back on when installing the bolts back on this end.